While a typical router has the capability to cover a small house with a Wi-Fi signal. However, sometimes you will find a couple of rooms where the signal strength is extremely low. If you have such rooms in your house, then you need to get a Wi-Fi extender.
While there are many Wi-Fi extenders available on the market, but the one that is really topping the charts is Netgear EX2700 Wi-Fi Range Extender.
If you are using this particular model of Wi-Fi extender and still facing connectivity issues in some rooms, then you can follow the below-mentioned tips and tricks to get a strong signal throughout your premises.
You need to place your extender in such a place where it can cover the maximum area in your house. While setting up an Extender, it needs to be placed near the router, but as soon as the setup is finished, you can place the extender to a new location, preferably the one where Wi-Fi signal never reaches.
Hide & Seek
If you are unable to find a good location for your Netgear Extender EX2700, then you may have to use an AC extension cord to get Netgear EX2700 extender to where it works best.
You can use a Wi-Fi reflector or create one on your own from an aluminum foil or an empty soda in order to direct the Wi-Fi signal in the right direction.
If you live in a ranch house or a single-floor apartment, then that’s good. However, if you want to set up your extender for a floor above or below the router, then you will have to consider the extra height and the wood, plaster, and steel in the ceilings and floor because building materials absorb Wi-Fi signal. To fix this problem, you can move the Netgear EX2700 extender closer to the router, preferably on the same floor.
In the Way
While identifying the location for your Wi-Fi extender, you need to avoid objects that reflect the signal or absorb it. Also, keep in mind that the extender remains as far as possible from the stray radio-frequency signals. Refrigerators, cordless phones, baby monitors and microwave ovens can play a spoilsport with the Wi-Fi signal.
While setting up Netgear EX2700 Extender, you need to decide whether to keep the name of the network same or different. If you use the same login credentials, then you can easily roam between the router and extender without having to log in repeatedly.
This may also result in problems in areas covered by both the extender and router where the signals overlap. At that time, you need to try using a different network name.
Netgear EX2700 Extender comes with its own software for enhancing the position and performance. However, that software is nothing when compared to the dedicated apps for analyzing Wi-Fi networks. Therefore, you can use such apps to identify whether the network is healthy or is there anything to be done to beef up the signal strength.
If there is a pesky dead zone in your house, which can’t be fixed with an extender, then you will have to scrap the router and go with a mesh networking kit. Reason being, the kit is designed to work as a router and extender, plus it has a large reach as well.
Therefore, these are the tips and tricks that you need to follow in order to improve the signal strength of Netgear EX2700 extender. If you want to know more about these tips and tricks or clarify something, then you can get in touch with Netgear EX2700 range extender experts.